Dr. Mohit Pandey Assistant Professor

Jan to 2026-Present

1. Assistant Professor, Department of Smart Manufacturing, NAMTECH

Jan 2024 – June 2025

1. Bio-Design Fellow, SIB SHInE, KGMU Lucknow & IIT Kanpur

June 2023 – Dec 2024

1. Technical Analyst, Treacle Technologies Pvt. Ltd., Research Park, IIT Kanpur

1. Mohit Pandey, Ayushi Mairal, Himanshu Gupta, Ashok Kumar, Shantanu Bhattacharya, “Rapid surface modification of PEEK by ambient temperature sulfonation for high shelf-life biomedical applications”. Accepted in Surfaces and Interfaces, (2024)
2. Shreyansh Tatiya, Shiwangi Maurya, Mohit Pandey, Shantanu Bhattacharya, “Advanced neutralization technique for the treatment of highly acidic wastewater from steel rolling mills of western Rajasthan”. Accepted in Water Environment Research, (2024)
3. Shreyansh Tatiya, Mohit Pandey, Satyam Gupta, Shantanu Bhattacharya, “Photocatalytic Performance of Boron-Doped TiO2 for Treatment of Rhodamine-B Dye and Industrial Wastewater Under Ultraviolet Irradiation”. Accepted in Environmental Engineering Science (2023)
4. Himanshi Jangir, Mohit Pandey, Rishabh Jha, Amarish Dubey, Shorya Verma, Deepu Philip, Sabyasachi Sarkar and Mainak Das, “Sequential entrapping of Li, S in a conductivity cage of N-doped reduced graphene oxide supercapacitor derived from silk cocoon: A Hybrid Li-S-Silk Supercapacitor”. Accepted in Applied Nanoscience. (2018)
5. Amarish Dubey, Himanshi Jangir, Mohit Pandey, Mayank Dubey, Shourya Verma, Manas Roy, Sushil Kumar Singh, Deepu Philip and Mainak Das, “An eco-friendly, low power charge storage device from bio-tolerable nano-cerium oxide electrodes for bioelectrical and biomedical applications”. Accepted in Biomedical Physics & Engineering Express (2017)
6. Sagnik Sarma Choudhury#, Mohit Pandey#, and Shantanu Bhattacharya. “Recent Developments in Surface Modification of PEEK Polymer for Industrial Applications: A Critical Review”, Rev. Adhesion Adhesives, Vol. 9, No. 3, November 2021
7. Poonam Sundriyal, Mohit Pandey, and Shantanu Bhattacharya. “Plasma-assisted surface alteration of industrial polymers for improved adhesion bonding”, International Journal of Adhesion and Adhesives, Volume 101, 2020, 102626, ISSN 0143-7496, https://doi.org/10.1016/j.ijadhadh.2020.102626
8. Shreyansh Tatiya, Mohit Pandey, and Shantanu Bhattacharya. “Nanoparticles containing boron and its compounds—synthesis and applications: A review” Journal of Micromanufacturing, SAGE journals 2020; 3(2):159-173.doi:10.1177/2516598420965319
9. Sanjay Kumar, Pulak Bhushan, Mohit Pandey, and Shantanu Bhattacharya. “Additive Manufacturing as an Emerging Technology for Fabrication of Microelectromechanical Systems (MEMS)”, Journal of Micro manufacturing, SAGE journals 2019; 2(2):175-197. doi:10.1177/2516598419843688
10. Mohammed Rashiku, Mohit Pandey, Shantanu Bhattacharya, “Integrating microfluidics and sensing for capability enhancement,” in Impedance spectroscopy and its application in biological detection, edited by Geeta Bhatt, Manoj Bhatt and Shantanu Bhattacharya (CRC Press, Taylor & Francis Group, 2023)
11. Kapil Manoharan, Mohit Pandey, Shantanu Bhattacharya, “Life cycle assessment of nanoscale polymer-based coatings,” in Polymer-Based Nanoscale Materials for Surface Coatings. (Chapter 26, Elsevier, 2023)
12. Mohit Pandey, Poonam Sundriyal, Shreyansh Tatiya and Shantanu Bhattacharya, “Polymer-Based Electrolytes for Solid-State Batteries: Current Status and Future Challenges in Emerging Applications,” in Trends in Applications of Polymers and Polymer Composites, edited by Vinay Kumar Patel, Rishi Kant, Pankaj Singh Chauhan and Shantanu Bhattacharya (AIP Publishing, Melville, New York, 2022), Chapter 5, pp. 5-1–5-22. https://doi.org/10.1063/9780735424555_005
13. Mohit Pandey, Shreyansh Tatiya and Shantanu Bhattacharya, “Design and Development of MEMS-Based Sensors for Wearable Diagnostic Applications,” in MEMS Applications in Biology and Healthcare, edited by Aviru Kumar Basu, Adreeja Basu, Sagnik Ghosh and Shantanu Bhattacharya (AIP Publishing, Melville, New York, 2021), Chapter 10, pp. 10-1–10-34. https://doi.org/10.1063/9780735423954_010
14. Mohit Pandey, Mohammed Rashiku, Shantanu Bhattacharya, “Recent progress in the development of printed electronic devices”, Chemical Solution Synthesis for Materials Design and Thin Film Device Applications, Editor(s): Soumen Das, Sandip Dhara , Elsevier, 2021, Pages 349-368, ISBN 9780128197189, https://doi.org/10.1016 /B978-0-12-819718-9.00008-X.
15. Pankaj Singh Chauhan, Mohit Pandey, Shantanu Bhattacharya (2019) “Paper Based Sensors for Environmental Monitoring”, In: Bhattacharya S., Kumar S., Agarwal A. (eds) Paper Microfluidics. Advanced Functional Materials and Sensors. Springer, Singapore. https://doi.org/10.1007/978-981-15-0489-1_10
16. Mohit Pandey, Krutika Shahare, Mahima Srivastava, Shantanu Bhattacharya. (2019) “Paper-Based Devices for Wearable Diagnostic Applications”, In: Bhattacharya S., Kumar S., Agarwal A. (eds) Paper Microfluidics. Advanced Functional Materials and Sensors. Springer, Singapore. https://doi.org/10.1007/978-981-15-0489-1_12
17. Mohit Pandey, Mahima Srivastava, Krutika Shahare, Shantanu Bhattacharya. (2019) Paper Microfluidic-Based Devices for Infectious Disease Diagnostics. In: Bhattacharya S., Kumar S., Agarwal A. (eds) Paper Microfluidics. Advanced Functional Materials and Sensors. Springer, Singapore. https://doi.org/10.1007/978-981-15-0489-1_13
18. Mohit Pandey, Shreyansh Tatiya, Shantanu Bhattacharya, Shailendra Singh, “Sensors in the Joining and Welding Process in Automobile Manufacturing”, Sensors for Automotive and Aerospace Applications, Shantanu Bhattacharya, Avinash Kumar Agarwal, Om Prakash and Shailendra Singh (Editors), Springer (January 2019), DOI: 10.1007/978-981-13-3290-6_13
19. Mohit Pandey, Shreyansh Tatiya, Shantanu Bhattacharya, Shailendra Singh, “Sensors in Assembly Shop in Automobile Manufacturing”, Sensors for Automotive and Aerospace Applications, Shantanu Bhattacharya, Avinash Kumar Agarwal, Om Prakash and Shailendra Singh (Editors), Springer (January 2019), DOI: 10.1007/978-981-13-3290-6_10
20. Shreyansh Tatiya, Mohit Pandey, Shantanu Bhattacharya, Shailendra Singh, “Sensors Used in Automotive Paint Shops”, Sensors for Automotive and Aerospace Applications, Shantanu Bhattacharya, Avinash Kumar Agarwal, Om Prakash and Shailendra Singh (Editors), Springer (January 2019), DOI: 10.1007/978-981-13-3290-6_14
21. Shantanu Bhattacharya, Avinash Kumar Agarwal, Om Prakash, Shailendra Singh, Mohit Pandey, Rishi Kant, “Introduction to Sensors for Aerospace and Automotive Applications”, Sensors for Automotive and Aerospace Applications, Shantanu Bhattacharya, Avinash Kumar Agarwal, Om Prakash and Shailendra Singh (Editors), Springer (January 2019),DOI:10.1007/978-981-13-3290-6_1

1. Surface and Interface, User Centric Designing, Design Thinking, Advance Material Processing, Nanotechnology, Biomedical Systems, Healthcare and Entrepreneurship